Operative Modes And Relevant Ventilation Parameters - Siare Morpheus E User Manual

5.10.1 Operative modes and relevant ventilation parameters

5-34
Set the max limit value of airways pressure. The parameter it is
used in the pressure control modalities and it is to fix an operative
limit on airways pressure which should not be overcome.
Set the airways positive pressure value in expiratory phase.
Set the ventilator respiratory rate.
Set the relation between inspiratory and expiratory phases.
Set the flow value during the inspiratory phase.
Set the flow level (pressure) to recognize the patient spontaneous
activity. (L/min) - (cmH 2 O).
Set the desired value of tidal volume to be guaranteed to the
patient.
Maximum limit of airways pressure, beyond which the PLIM
parameter cannot go.
Set the airways positive pressure value in expiratory phase.
Set the ventilator respiratory rate.
Set the relation between inspiratory and expiratory phases.
User's Manual, version DU3300105