Verified what listed in the previous note:
•
close the patient circuit;
•
press the AUT key located on the keypad of ventilator, as required on the
display.
Range of values accepted by the LEAK TEST
Patient Circuit Compliance
B. System Compliance
Leak (ml/min):
MORPHEUS
Basing on known and calculated data (flow, pressure and time), it is
possible to find out the parameters shown on the display.
The values of the compliance obtained durino the LEAK TEST are
displayed for the "compensation of dead space" function.
Min.
Max.
0,2
4
Standard value (4.3)
0
100
6-37