Cause
When the line speed of the fuser unit is faster than that of the paper exit unit, slack on the paper
gradually increases toward the trailing edge, resulting in a paper crease.
Solution
1.
Access the [Adjustment Settings for Operators] menu.
2.
Execute No. 0512-01 "Fuser Unit Speed Adjustment".
It takes about 3 minutes.
Matte Paper Scratched During Folding
Refer to
"Matte Paper Scratched During
Insufficient Gloss: Clear Image
Unlike FC mode, the image may appear cloudy if image gloss is low in FCS (clear) mode.
[A]: Normal image
11.Image Quality Problem: Full Page
Folding".
657