Ricoh Pro C7200S Troubleshooting Manual page 158

1.SC Codes
SC No. Level
SC No. Level
SC720-12 D
SC No. Level
SC720-13 D
SC No. Level
SC720- B
15
154
Error Name/Error Condition/Major Cause/Solution

Reconnect the connectors.

Replace the harnesses.

Replace the Main Board.
Error Name/Error Condition/Major Cause/Solution
Transport Motor Error 3 (Downstream From Punch Unit)
Same as SC720-10
Same as SC720-10

Replace the Junction Gate Transport Motor.

Reconnect the connectors.

Replace the harnesses.

Replace the Main Board.
Error Name/Error Condition/Major Cause/Solution
Transport Motor Error 4 (registration)
Same as SC720-10
Same as SC720-10

Replace the Registration Motor.

Reconnect the connectors.

Replace the harnesses.

Replace the Main Board.
Error Name/Error Condition/Major Cause/Solution
Transport Motor Error 6 (Pre-stack)
DC motor drive software detected an error (this SC issues immediately at 1
occurrence).

Motor defective

Connecter disconnected

Overload

Encoder defective

Replace the Pre-stack Motor

Reconnect the connectors.

Replace the harnesses.

Replace the Main Board.
st