Ricoh Pro C7200S Troubleshooting Manual page 422

3.Troubleshooting: Paper Delivery Problems
7.
Loosen the two screws on the adjustor plate (
8. Move the adjustor plate left or right to adjust the skew so that the skew amount "[1] – [2]" on all 5
copies is within the recommended range +/- 0.2mm.

1 notch [A] on the scale is equivalent to a skew adjustment of approximately 0.2mm. *
This value may vary with variations in parts.

If [1] > [2]: move the adjustor plate to the right.
418
x2).