Ricoh Pro C7200S Troubleshooting Manual page 333

SC No. Level









After the repairs, cancel the low performance mode, and then turn the power
off/on.
SC No. Level
SC754- B Perfect Binder: Paper detect sensor (rear) paper detection error
35
When the stacking tray was raised, the paper detect sensor (rear) did not go ON,
even after the stacking tray overflow sensor went ON and the stacking tray lift
motor had operated for 40 mm of lift.










After the repairs, cancel the low performance mode, and then turn the power
off/on.
SC No. Level
SC754- B Perfect Binder: Paper detect sensor (rear) no paper detection error
36
When the stacking tray was lowered, the paper detect sensor (rear) did not go
OFF after the stacking tray lift motor had operated long enough for 10mm of
lowering.


Error Name/Error Condition/Major Cause/Solution
Stacking tray lift motor defective
Harness connector loose, broken, defective
Master control board defective
Reconnect the connector.
Replace the stacking tray lift motor.
Replace the paper detect sensor (front).
Replace the master control board.
Replace the motor harness.
Replace the sensor harness.
Error Name/Error Condition/Major Cause/Solution
Paper detect sensor (rear) defective
Stacking tray lift motor defective
Harness connector loose, broken, defective
Master control board defective
Reconnect the connector.
Replace the stacking tray lift motor.
Replace the paper detect sensor (rear).
Replace the master control board.
Replace the motor harness.
Replace the sensor harness.
Error Name/Error Condition/Major Cause/Solution
Paper detect sensor (rear) defective
Stacking tray lift motor defective
1.SC Codes
329