Ricoh Pro C7200S Troubleshooting Manual page 353

SC No. Level

After the repairs, cancel the low performance mode, and then turn the power
off/on.
SC No. Level
SC754- B Perfect Binder: Drive switch motor error (down to up)
77
The rack where the drive gear is mounted did not retract from the drive switch
sensor after the drive switch motor operated for 3 s.










After the repairs, cancel the low performance mode, and then turn the power
off/on.
SC No. Level
SC754- B Perfect Binder: Drive switch motor error (up to down)
78
The rack where the drive gear is mounted was late arriving at the drive switch
sensor after the drive switch motor operated for 3 s.










After the repairs, cancel the low performance mode, and then turn the power
off/on.
Error Name/Error Condition/Major Cause/Solution
Clear the signature jam
Error Name/Error Condition/Major Cause/Solution
Drive switch motor defective
Drive switch sensor defective
Connector loose, broken, defective
Inserter control board defective
Reconnect the connector.
Replace the drive switch motor.
Replace the drive switch sensor
Replace the inserter control board.
Replace the motor harness.
Replace the sensor harness.
Error Name/Error Condition/Major Cause/Solution
Drive switch motor defective
Drive switch sensor defective
Connector loose, broken, defective
Inserter control board defective
Reconnect the connector.
Replace the drive switch motor.
Replace the drive switch sensor
Replace the inserter control board.
Replace the motor harness.
Replace the sensor harness.
1.SC Codes
349