Ricoh Pro C7200S Troubleshooting Manual page 421

1.
Set A3 or DLT plain paper (63.1-80.0 gsm) on Tray 2.
2.
Select [14: Trimming Area] in SP 2-109-003 (Test Pattern - Pattern Selection) to print 5 copies of
the test pattern Trimming Area in b/w and simplex.
3.
Calculate the skew amount "[1] - [2]" on all five copies, and calculate the average value of all the
five copies. If the average value is not within the recommended range +/- 0.2 mm, go to the next
step.

It is recommended to use a loupe.
4.
Open the right front door.
5. Remove the handle B5 [A].
6.
Lower the lever [A] and then remove the front cover [B].
3.Troubleshooting: Paper Delivery Problems
417