Ricoh Pro C7200S Troubleshooting Manual page 208

1.SC Codes
SC No. Level



SC No. Level
SC750- D Perfect Binder: Right trimming buffer HP sensor late error
44
The right trimmings buffer HP sensor did not go OFF within 5 sec. after the
trimmings buffer moved toward the sensor.
Trimmings buffer motor defective, Right trimmings buffer HP sensor defective,
overload, connector broken defective, Buffer full of trimmings







SC No. Level
SC750- D Perfect Binder: Trimmings buffer motor rotation error
45
No encoder lock input received within 50 ms during operation.









SC No. Level
SC750- D Perfect Binder: Thrust plate operation error
46
The thrust press plate sensor did not go OFF after the trimmings buffer moved to
the left for 3 sec. (blocked by jammed trimming scraps).
Trimmings buffer motor defective, Thrust plate sensor defective, overload,
204
Error Name/Error Condition/Major Cause/Solution
Replace the motor harness.
Replace the sensor harness.
Clear the signature jam.
Error Name/Error Condition/Major Cause/Solution
Reconnect the connector.
Replace the trimming buffer motor.
Replace the right trimming buffer HP sensor.
Replace the cutter control board.
Replace the motor harness.
Replace the sensor harness.
Clear the signature jam.
Error Name/Error Condition/Major Cause/Solution
Trimmings buffer motor defective
Trimming buffer encoder sensor defective, overload, connector broken
defective, buffer full of trimmings
Reconnect the connector.
Replace the trimming buffer motor.
Replace the trimming buffer encoder sensor.
Replace the cutter control board.
Replace the motor harness.
Replace the sensor harness.
Clear the signature jam.
Error Name/Error Condition/Major Cause/Solution