Ricoh Pro C7200S Troubleshooting Manual page 204

1.SC Codes
SC No. Level

SC No. Level
SC750-32 D
SC No. Level
SC750-33 D
SC No. Level
SC750-34 D
SC No. Level
SC750- D Perfect Binder: Glue supply fan (high) lock error
35 Glue supply (high) fan failed to generate a lock signal within 12 sec., and signal
could be detected even after a re-try.

200
Error Name/Error Condition/Major Cause/Solution
Replace the motor harness.
Error Name/Error Condition/Major Cause/Solution
Perfect Binder: Signature fan 2 (rear) lock error
See SC750-31

Rear signature fan 2 overloaded, defective

Slave Control Board defective

Reconnect the connector.

Replace the rear signature fan 2.

Replace the slave board.

Replace the motor harness.
Error Name/Error Condition/Major Cause/Solution
Perfect Binder: Signature fan 1 (front) lock error
See SC750-31

Front signature fan 1 overloaded, defective

Slave Control Board defective

Reconnect the connector.

Replace the front signature fan 1.

Replace the slave board.

Replace the motor harness.
Error Name/Error Condition/Major Cause/Solution
Perfect Binder: Signature fan 1 (rear) lock error
See SC750-31

Rear signature fan 1 overloaded, defective

Slave Control Board defective

Reconnect the connector.

Replace the rear signature fan 1.

Replace the slave board.

Replace the motor harness.
Error Name/Error Condition/Major Cause/Solution
Glue supply fan (high) overloaded, defective