Ricoh Pro C7200S Troubleshooting Manual page 122

1.SC Codes
SC No. Level






118
Error Name/Error Condition/Major Cause/Solution
Liquid remaining quantity decreased (leak exists)
If it is possible to repair the leakage location, perform repairs and then refill
the liquid.
If it is not possible to repair the leakage location, replace the main unit.
Liquid remaining quantity decreased (no leak)
Refill the liquid.
Coolant Remaining Switch connector disconnected/ harness broken
Reconnect the connector.
Coolant Remaining Switch defective
Replace the Coolant Remaining Switch.
IOB board defective
Replace the IOB.
Harness shorted
Replace the harness.