Ricoh Pro C7200 Series Cip Training
  1. Manuals
  2. Brands
  3. Ricoh Manuals
  4. Printer
  5. PRO C7200
  6. Cip training

Ricoh Pro C7200 Series Cip Training

Hide thumbs Also See for Pro C7200 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
CIP Training
Pro C7200 series
2
Throughput

Advertisement

Table of Contents
loading

Related Manuals for Ricoh Pro C7200 Series

Summary of Contents for Ricoh Pro C7200 Series

  • Page 1 CIP Training Pro C7200 series Throughput...

  • Page 3: Startup And Shutdown

    CIP Training Pro C7200 series Throughput Startup and Shutdown. Front and left view DWP004 1. Main power switch To operate the machine, the main power switch must be on. If it is off, open the main power switch's cover and turn the switch on.

  • Page 4: Turning On/Off The Power

    CIP Training Pro C7200 series Throughput Turning On/Off the Power • Do not push the main power switch repeatedly. • When you push the main power switch, wait at least 10 seconds after it is confirmed that the main power indicator has lit up or gone out.

  • Page 5: Turning Off The Main Power

    CIP Training Pro C7200 series Throughput • After you switch the main power on, a screen may appear to indicate that the machine is initializing. Do not switch the power off during this process. Initialization takes about 18 minutes. However, the time for initialization may differ depending on which options are installed on the machine.
  • Page 6 CIP Training Pro C7200 series Throughput Low Power mode If you do not use the machine for a certain period after an operation, the display will turn off and the machine goes into Low Power mode. The machine uses less electricity in Low Power mode.
  • Page 7 CIP Training Pro C7200 series Throughput Adding/Replacing Toner bottles 1. Open front upper right cover. 2. Push the bottle lever at the bottom, and then pull out the toner bottle. 3. Take the new bottle out of the box. 4. Remove the cap (place it on the Turn it end on end five or six times.

  • Page 8: Supply Yields

    CIP Training Pro C7200 series Throughput Adding/Replacing Toner bottles 6. Close the Toner Bottle cover. 5. Insert NEW bottle until lever clicks. Supply Yields 45,000 sheets per 1,482 g bottle of black toner 45,000 sheets per 1,482 g bottle of cyan toner...

  • Page 9: Removing Jammed Paper

    CIP Training Pro C7200 series Throughput Paper path and clearing misfeeds Removing Jammed Paper • Some of this machine's internal components get very hot. For this reason, take care when removing misfed paper. Not doing so could result in burns.
  • Page 10 CIP Training Pro C7200 series Throughput Paper path and clearing misfeeds Procedure for removing jammed paper Remove the jammed paper by following the procedures that are displayed on the control panel. When [Previous] or [Next] is displayed, press [Next] after completing a procedure.
  • Page 11 CIP Training Pro C7200 series Throughput Paper path and clearing misfeeds DWP528 3. Turn the knob counterclockwise until the misfed paper comes out from the right side of the fusing unit, and then remove it. DWP529 4. Return the knob to its original position.

Table of Contents