Ricoh Pro C7200S Troubleshooting Manual page 328

1.SC Codes
SC No. Level


After the repairs, cancel the low performance mode, and then turn the power
off/on.
SC No. Level
SC754- B Perfect Binder: Jog fence front large HP sensor lag error
24
While large-size paper was being jogged, the jog fence front large HP sensor did
not go OFF after the front jog fence motor operated long enough for 20 mm of
feed.










After the repairs, cancel the low performance mode, and then turn the power
off/on.
SC No. Level
SC754- B Perfect Binder: Jog fence rear HP sensor late error
25
While jogging small-size paper, the rear jog fence HP sensor did not go ON, even
though the jog fence motor operated long enough for 60 mm of feed.










324
Error Name/Error Condition/Major Cause/Solution
Replace the motor harness.
Replace the sensor harness.
Error Name/Error Condition/Major Cause/Solution
Jog fence front large HP sensor defective
Jog fence front motor defective
Connector loose, broken, defective
Master control board defective
Reconnect the connector.
Replace the jog fence front motor.
Replace the jog fence front large HP sensor.
Replace the master control board.
Replace the motor harness.
Replace the sensor harness.
Error Name/Error Condition/Major Cause/Solution
Jog fence rear HP sensor defective
Jog fence rear motor defective
Connector loose, broken, defective
Master control board defective
Reconnect the connector.
Replace the jog fence rear motor.
Replace the jog fence rear HP sensor.
Replace the master control board.
Replace the motor harness.
Replace the sensor harness.