Ricoh Pro C7200S Troubleshooting Manual page 46

1.SC Codes
SC No. Level
SC373- D
05
SC No. Level
SC374- D ID Sensor Pattern Density Low Error (K)
01
SC374- D ID Sensor Pattern Density Low Error (C)
02
SC374- D ID Sensor Pattern Density Low Error (M)
03
SC374- D ID Sensor Pattern Density Low Error (Y)
04
SC374- D ID Sensor Pattern Density Low Error (S)
05
ID Pattern adhesion (SP3-300-001 to 005) < Lower limit threshold (SP3-301-091
to 095) for three times in a row.




SC No. Level
SC381- D Potential sensor output high error (K)
01
SC381- D Potential sensor output high error (C)
02
SC381- D Potential sensor output high error (M)
03
SC381- D Potential sensor output high error (Y)
04
SC381- D Potential sensor output high error (S)
05
Vd(700) greater than 800[-V]
42
Error Name/Error Condition/Major Cause/Solution
ID Sensor Pattern Density High Error (S)
ID Pattern adhesion (SP3-300-001 to 005) > Upper limit threshold (SP3-301-081
to 085)
Excessive toner supply
Replace the sub-hopper.
Error Name/Error Condition/Major Cause/Solution
Abnormal development bias (Continuity fault)
Image transfer error
Check development bias continuity.
Check the image transfer unit.
Error Name/Error Condition/Major Cause/Solution