Ricoh Pro C7200S Troubleshooting Manual page 287

SC No. Level




After the repairs, cancel the low performance mode, and then turn the power
off/on.
SC No. Level
SC753- B Perfect Binder: Book collection buffer HP sensor error
13
The book collection buffer HP sensor did not go OFF within the time prescribed
for release of the book in the book buffer.











After the repairs, cancel the low performance mode, and then turn the power
off/on.
SC No. Level
SC753- B Perfect Binder: Book collection buffer tray HP sensor late error
14 The book collection buffer HP sensor did not go off even after the book buffer tray
moved for 3 sec.







Error Name/Error Condition/Major Cause/Solution
Replace the cutter control board.
Replace the motor harness.
Replace the sensor harness.
Clear the signature jam.
Error Name/Error Condition/Major Cause/Solution
Book buffer tray motor connector loose, broken, defective
Motor overload, defective
Book collection buffer tray HP sensor loose, broken, defective
Mechanism blocked by paper scraps
Reconnect the connector.
Replace the book buffer tray motor.
Replace the book collection buffer tray HP sensor.
Replace the cutter control board.
Replace the motor harness.
Replace the sensor harness.
Clear the signature jam.
Error Name/Error Condition/Major Cause/Solution
Book buffer tray motor connector loose, broken, defective
Motor overload
Motor defective
Book collection buffer tray HP sensor loose, broken, defective, Blocked by
paper scraps
Reconnect the connector.
Replace the book buffer tray motor.
Replace the book collection buffer tray HP sensor.
1.SC Codes
283