Ricoh Pro C7200S Troubleshooting Manual page 484

3.Troubleshooting: Paper Delivery Problems
6.
Adjust with the screw that holds the paper lift sensor bracket.
[For repeated feeding problems due to double feeding or double feeding as a bundle]
Position the paper lift sensor bracket so it increases the gap [C] between the stay [A] and the paper lift
sensor bracket [B] while keeping an eye on the scale on the upper part of the stay (1mm between
lines).

Positioning it at a point at a distance of 0.5mm from the position before adjustment lowers the
upper limit position about 0.8mm below the current state.
480