Ricoh Pro C7200S Troubleshooting Manual page 269

SC No. Level
SC752- D Perfect Binder: Main grip press sensor (L) position late error
46 When lowering cover in main grip to press position, MG press sensor (L) did not
go ON, even though the MG lift motor had operated for 6185 ms.








SC No. Level
SC752- D Perfect Binder: Main grip press sensor (L) position lag error
47
When raising cover in main grip from press position, MG press sensor (L) did not
go OFF, even though the MG lift motor had operated for 95 ms.









SC No. Level
SC752- D Perfect Binder: Signature exit sensor late error
48
When signature was passed from main grip to signature exit roller, signature exit
sensor did not go ON after MG lift motor moved to signature turnover position.







Error Name/Error Condition/Major Cause/Solution
MG lift motor defective
MG press sensor (L) defective
Reconnect the connector.
Replace the MG lift motor.
Replace the MG press sensor (L).
Replace the slave control board.
Replace the motor harness.
Replace the sensor harness.
Error Name/Error Condition/Major Cause/Solution
MG lift motor defective
MG press sensor (L) defective
Connector harness loose, broken, defective
Reconnect the connector.
Replace the MG lift motor.
Replace the MG press sensor (L).
Replace the slave control board.
Replace the motor harness.
Replace the sensor harness.
Error Name/Error Condition/Major Cause/Solution
MG lift motor defective
Signature exit sensor defective
Signature out of position, snagged on main grip
Reconnect the connector.
Replace the MG lift motor.
Replace the signature exit sensor.
Replace the slave control board.
1.SC Codes
265