Ricoh Pro C7200S Troubleshooting Manual page 329

SC No. Level
After the repairs, cancel the low performance mode, and then turn the power
off/on.
SC No. Level
SC754- B Perfect Binder: Jog fence rear HP sensor lag jam
26
While small-size paper was being jogged, the jog fence rear HP sensor did not go
OFF after the rear jog fence motor operated long enough for 40 mm of feed.










After the repairs, cancel the low performance mode, and then turn the power
off/on.
SC No. Level
SC754- B Perfect Binder: Jog fence rear large HP sensor late error
27 While large-size paper was being jogged, the rear jog fence large HP sensor did
not go ON, even though the jog fence rear motor operated long enough for 70mm
of feed.










After the repairs, cancel the low performance mode, and then turn the power
off/on.
Error Name/Error Condition/Major Cause/Solution
Error Name/Error Condition/Major Cause/Solution
Jog fence rear HP sensor defective
Jog fence rear motor defective
Connector loose, broken, defective
Master control board defective
Reconnect the connector.
Replace the jog fence rear motor.
Replace the jog fence rear HP sensor.
Replace the master control board.
Replace the motor harness.
Replace the sensor harness.
Error Name/Error Condition/Major Cause/Solution
Jog fence rear large HP sensor defective
Jog fence rear motor defective
Connector loose, broken, defective
Master control board defective
Reconnect the connector.
Replace the jog fence rear motor.
Replace the jog fence rear large HP sensor.
Replace the master control board.
Replace the motor harness.
Replace the sensor harness.
1.SC Codes
325