Ricoh Pro C7200S Troubleshooting Manual page 203

SC No. Level
SC No. Level
SC750-29 D
SC No. Level
SC750-30 D
SC No. Level
SC750- D Perfect Binder: Signature fan 2 (front) lock error
31
Front signature fan 2 failed to generate a lock signal within 12 sec., and signal
could be detected even after a re-try.





Error Name/Error Condition/Major Cause/Solution
See SC750-27

Right lower spine plate fan overloaded, defective

Slave Control Board defective

Reconnect the connector.

Replace the right lower spin plate fan.

Replace the slave board.

Replace the motor harness.
Error Name/Error Condition/Major Cause/Solution
Perfect Binder: Spine plate upper fan (front) lock error
See SC750-27

Front upper spine plate fan overloaded, defective

Slave Control Board defective

Reconnect the connector.

Replace the front upper spine plate fan.

Replace the slave board.

Replace the motor harness.
Error Name/Error Condition/Major Cause/Solution
Perfect Binder: Spine plate upper fan (right) lock error
See SC750-27

Upper right spine plate fan overloaded, defective

Slave Control Board defective

Reconnect the connector.

Replace the upper right spine plate fan.

Replace the slave board.

Replace the motor harness.
Error Name/Error Condition/Major Cause/Solution
Front signature fan 2 overloaded, defective
Slave Control Board defective
Reconnect the connector.
Replace the front signature fan 2.
Replace the slave board.
1.SC Codes
199