Ricoh Pro C7200S Troubleshooting Manual page 259

SC No. Level
the same time.








SC No. Level
SC752- D Perfect Binder: Left cover guide release position late error
20
During movement toward the left cover guide open position, the cover guide open
sensor (left) did not go ON after the cover guide motor (left) had operated long
enough for 3000 ms of movement.








SC No. Level
SC752- D Perfect Binder: Cover guide (right) HP sensor late error
21
During movement toward the HP sensor of the right cover path, the cover guide
HP sensor (right) did not go ON after the cover guide motor (right) had operated
long enough for 3000 ms of movement.








Error Name/Error Condition/Major Cause/Solution
Cover guide HP sensor (L) defective
Cover guide open sensor (left)
Harness connector loose, broken, defective
Reconnect the connector.
Replace the cover guide HP sensor (L).
Replace the cover guide open sensor (left).
Replace the master control board.
Replace the sensor harness.
Error Name/Error Condition/Major Cause/Solution
Cover guide (left) open sensor defective
Cover guide motor (left) defective
Reconnect the connector.
Replace the cover guide motor (left).
Replace the Cover guide (left) open sensor.
Replace the master control board.
Replace the motor harness.
Replace the sensor harness.
Error Name/Error Condition/Major Cause/Solution
Cover guide (right) HP sensor defective
Cover guide motor (right) defective
Reconnect the connector.
Replace the cover guide motor (right).
Replace the cover guide (right) HP sensor.
Replace the master control board.
Replace the motor harness.
Replace the sensor harness.
1.SC Codes
255