Ricoh Pro C7200S Troubleshooting Manual page 657

*1 At least 10 sheets (Print enough number of sheets to recognize dirt on the edge area of paper.)

Increasing the fusing heat temperature may cause the following side effects.
- Increased curling (causes jamming).
- Increased glossy streaks.
- Roughness occurs on the image surface.
- Residual gloss (gloss ghost) occurs.
- Uneven gloss occurs.
- Bubble-shaped white spots on coated paper.

- Increased/decreased glossiness.

If side effects occur, set the temperature to a level where side effects do not occur.

After taking the above measures, do the color calibration adjustment of the DFE.
Toner Stains on trailing Edge of think paper
Trailing edge is stained with toner when printing on thick paper.
11.Image Quality Problem: Full Page
653