Ricoh Pro C7200S Troubleshooting Manual page 284

1.SC Codes
SC No. Level








After the repairs, cancel the low performance mode, and then turn the power
off/on.
SC No. Level
SC752- B Perfect Binder: Trimming buffer HP sensor late error
87
The left trimmings buffer HP sensor did not go ON within 5 sec. after the
trimmings buffer moved toward the sensor.











After the repairs, cancel the low performance mode, and then turn the power
off/on.
SC No. Level
SC752- B Perfect Binder: Right trimming buffer HP sensor lag error
88
The right trimmings buffer HP sensor did not go OFF within 3 sec. after the
trimmings buffer moved away from the sensor.




280
Error Name/Error Condition/Major Cause/Solution
Buffer full of trimmings
Reconnect the connector.
Replace the trimmings buffer motor.
Replace the left trimmings buffer HP sensor.
Replace the cutter control board.
Replace the motor harness.
Replace the sensor harness.
Clear the signature jam.
Error Name/Error Condition/Major Cause/Solution
Buffer full of trimmings
Trimmings buffer motor defective
Motor connector loose, broken, defective
Left trimmings buffer HP sensor defective
Reconnect the connector.
Replace the trimmings buffer motor.
Replace the left trimmings buffer HP sensor.
Replace the cutter control board.
Replace the motor harness.
Replace the sensor harness.
Clear the signature jam.
Error Name/Error Condition/Major Cause/Solution
Buffer full of trimmings
Trimmings buffer motor defective
Motor connector loose, broken, defective
Right trimmings buffer HP sensor defective