Ricoh Pro C7200S Troubleshooting Manual page 336

1.SC Codes
SC No. Level





After the repairs, cancel the low performance mode, and then turn the power
off/on.
SC No. Level
SC754- B Perfect Binder: Stack tray HP sensor late error
41
When the tray moved to the home position, the HP sensor did not go ON after
enough time for 70mm of movement had elapsed.










After the repairs, cancel the low performance mode, and then turn the power
off/on.
SC No. Level
SC754- B Perfect Binder: Stack tray HP sensor lag error
42 When the tray moved from the home position, the HP sensor did not go OFF after
enough time for 10mm of movement had elapsed.








332
Error Name/Error Condition/Major Cause/Solution
Replace the paper detect sensor (front).
Replace the paper detect sensor (rear).
Replace the stack overflow sensor.
Replace the master control board.
Replace the sensor harness.
Error Name/Error Condition/Major Cause/Solution
Stack tray HP sensor defective
Stacking tray lift motor defective
Harness connector loose, broken, defective
Master control board defective
Reconnect the connector.
Replace the stacking tray lift motor.
Replace the stack tray HP sensor.
Replace the master control board.
Replace the motor harness.
Replace the sensor harness.
Error Name/Error Condition/Major Cause/Solution
Stack tray HP sensor defective
Stacking tray motor defective
Harness connector loose, broken, defective
Master control board defective
Reconnect the connector.
Replace the stacking tray motor.
Replace the stack tray HP sensor.
Replace the master control board.