Ricoh Pro C7200S Troubleshooting Manual page 639

Flowchart for Decreasing Set Temperature
*1: A3 SEF more than 10sheets
*2: If the print speed is set to "Middle", the temperature can be lowered by 5°C from the
temperature setting (present value) for High/Middle speed.
*3 If the print speed is set to "Low", the temperature can be lowered by 20°C from the temperature
setting (present value) for High/Middle speed.
*4 Guidelines for Fusing Quality

No image peeling.

No toner peeling even when rubbing the image gently with fingernails.

No toner peeling even when rubbing the image with the optical cloth.

When printing high coverage ratio of image, toner components that failed to be cleaned may
adhere to the fusing belt. As a result, residual gloss (gloss ghost) tends to occur more
frequently. In such cases, the residual gloss (gloss ghost) is improved by performing
"Adjustment Settings for Operators" menu No. 0508-01 "Smooth Fusing Belt: Belt Scratches"
approx. one to five times.

After taking the above measures, do the color calibration adjustment of the DFE.
Residual Gloss (Gloss Ghost): Multiple
Multiple vertical glossy lines appear.
11.Image Quality Problem: Full Page
635