Ricoh Pro C7200S Troubleshooting Manual page 273

SC No. Level

SC No. Level
SC752- D Perfect Binder: Main grip open sensor (R) lag error
57
At the start of the main grip close operation, the MG open sensor (R) did not go
OFF, even after the MG motor (R) had operated for 500 ms.









SC No. Level
SC752- D Perfect Binder: Main grip close sensor (R) late error
58
At the start of the main grip close operation, the MG close sensor (R) did not go
ON, even after the MG motor (R) had operated for 3000 ms.








SC No. Level
SC752- D Perfect Binder: Main grip close sensor (R) lag error
59
At the start of the main grip close operation, the MG close sensor (R) did not go
OFF, even after the MG motor (R) had operated for 500 ms.




Error Name/Error Condition/Major Cause/Solution
Replace the sensor harness.
Error Name/Error Condition/Major Cause/Solution
Main grip motor (R) defective
Main grip open sensor (R) defective
Connector or harness loose, broken, defective
Reconnect the connector.
Replace the main grip motor (R).
Replace the MG open sensor (R).
Replace the slave control board.
Replace the motor harness.
Replace the sensor harness.
Error Name/Error Condition/Major Cause/Solution
Main grip motor (R) defective
MG close sensor (R) defective
Reconnect the connector.
Replace the main grip motor (R).
Replace the MG close sensor (R).
Replace the slave control board.
Replace the motor harness.
Replace the sensor harness.
Error Name/Error Condition/Major Cause/Solution
Main grip motor (R) defective
Main grip close sensor (R) defective
Connector or harness loose, broken, defective
Reconnect the connector.
1.SC Codes
269