Ricoh Pro C7200S Troubleshooting Manual page 258

1.SC Codes
SC No. Level






SC No. Level
SC752- D Perfect Binder: Stack weight HP sensor lag error
17
During movement away from the HP sensor, the HP sensor did not go OFF after
enough time for 10mm of movement had elapsed.








SC No. Level
SC752- D Perfect Binder: Cover guide HP sensor (left) late error
18 During movement toward the HP sensor of the left cover path, the cover guide HP
sensor (left) did not go ON after the cover guide motor (left) had operated long
enough for 3000 ms of movement.








SC No. Level
SC752- D
19
254
Error Name/Error Condition/Major Cause/Solution
Reconnect the connector.
Replace the stack weight motor.
Replace the stack weight HP sensor defective.
Replace the master control board.
Replace the motor harness.
Replace the sensor harness.
Error Name/Error Condition/Major Cause/Solution
Stack weight HP sensor defective
Stack weight motor defective
Reconnect the connector.
Replace the stack weight motor.
Replace the stack weight HP sensor defective.
Replace the master control board.
Replace the motor harness.
Replace the sensor harness.
Error Name/Error Condition/Major Cause/Solution
Cover guide (left) HP sensor defective
Cover guide motor (left) defective
Reconnect the connector.
Replace the cover guide motor (left).
Replace the cover guide (left) HP sensor.
Replace the master control board.
Replace the motor harness.
Replace the sensor harness.
Error Name/Error Condition/Major Cause/Solution
Perfect Binder: Cover guide (left) HP sensor error
The cover guide HP sensor (left) and cover guide (left) open sensor went ON at