Ricoh Pro C7200S Troubleshooting Manual page 218

1.SC Codes
SC No. Level




SC No. Level
SC750-70 D
SC No. Level
SC750- D Perfect Binder: Book output tray HP sensor lag error
71 

Book output belt motor defective, Book output tray HP sensor defected,
disconnect, overload






SC No. Level
SC750- D
72
214
Error Name/Error Condition/Major Cause/Solution
Replace the cutter control board.
Replace the motor harness.
Replace the sensor harness.
Clear the signature jam.
Error Name/Error Condition/Major Cause/Solution
Perfect Binder: Book lift tray motor rotation error
No encoder lock input received within 50 ms during operation.

Book lift tray motor defective,

Book lift tray encoder sensor defective, disconnect

Reconnect the connector.

Replace the book lift tray motor.

Replace the Book lift tray encoder sensor

Replace the cutter control board.

Replace the motor harness.

Replace the sensor harness.

Clear the signature jam.
Error Name/Error Condition/Major Cause/Solution
The book output tray HP sensor did not go OFF within 1 sec. after it went
ON.
The book output tray HP sensor did not go OFF after enough time had
elapsed for the tray to move more than 10 mm.
Reconnect the connector.
Replace the book output belt motor.
Replace the book output tray HP sensor.
Replace the cutter control board.
Replace the motor harness.
Replace the sensor harness.
Error Name/Error Condition/Major Cause/Solution
Perfect Binder: Book output tray HP sensor late error
The book output tray HP sensor did not go ON within 3.5 sec. after it went OFF.
Book output belt motor defective, Book output tray HP sensor defected,