Ricoh Pro C7200S Troubleshooting Manual page 247

SC No. Level




SC No. Level
SC751- D Perfect Binder: Front door lock release error
68
The front door lock release sensor did not go ON, even though the door was
unlocked.









SC No. Level
SC751-69 D
SC No. Level
SC751- D Perfect Binder: Switchback flapper HP sensor late error
70
During the switchback flapper lift operation, the switchback flapper HP sensor did
not go ON, even though the switchback flapper motor operated long enough for
lifting through an arc of 50 degrees.
Error Name/Error Condition/Major Cause/Solution
Replace the front door lock release sensor.
Replace the master control board.
Replace the SOL harness.
Replace the sensor harness.
Error Name/Error Condition/Major Cause/Solution
Front door lock solenoid defective
Front door lock release sensor defective
Connector loose, broken, defective
Reconnect the connector.
Replace the front door lock solenoid.
Replace the front door lock release sensor.
Replace the master control board.
Replace the SOL harness.
Replace the sensor harness.
Error Name/Error Condition/Major Cause/Solution
Perfect Binder: Front door force open error
The front door was detected open, even though it was locked.

Front door switch defective

Front door solenoid defective

Connector loose, broken, defective

Reconnect the connector.

Replace the front door lock solenoid.

Replace the front door switch.

Replace the master control board.

Replace the SOL harness.

Replace the SW harness.
Error Name/Error Condition/Major Cause/Solution
1.SC Codes
243