Ricoh Pro C7200S Troubleshooting Manual page 182

1.SC Codes
SC No. Level
SC No. Level
SC725-71 D
SC No. Level
SC725-72 D
SC No. Level
SC725-73 D
SC No. Level
SC725- D Entrance JG Motor Error
74 

178
Error Name/Error Condition/Major Cause/Solution

Replace the Main Board.

Replace the Crease Motor.

Replace the harness.
Error Name/Error Condition/Major Cause/Solution
Horizontal Transport Motor Error

Motor driver detected an error. (SC from the first time)

Overcurrent to the motor.

Motor drive overheat

Replace the Main Board.

Replace the Horizontal Transport Motor

Replace the harness.
Error Name/Error Condition/Major Cause/Solution
Horizontal Exit Motor Error

Motor driver detected an error. (SC from the first time)

Overcurrent to the motor.

Motor drive overheat

Replace the Main Board.

Replace the Horizontal Exit Motor.

Replace the harness.
Error Name/Error Condition/Major Cause/Solution
Top Tray Transport Motor Error

Motor driver detected an error. (SC from the first time)

Overcurrent to the motor.

Motor drive overheat

Replace the Main Board.

Replace the Top Tray Transport Motor

Replace the harness.
Error Name/Error Condition/Major Cause/Solution
When moving to the home position, home position was not detected within
specified number of pulses. (The first time: jam display, the second time: SC)
When moving from the home position, home position was still detected after
specified number of pulses. (The first time: jam display, the second time: SC)