Ricoh Pro C7200S Troubleshooting Manual page 507


For the print with Custom Paper Setting (IMSS) : No. 1321-01 (Correct Paper Curl: Correction
Mode)
Cleaning the Rollers and Guide Boards in the Finisher
When a sheet with a high-density image on it is delivered or when the toner is not fused well, toner may
stick to the rollers and guide boards in the finisher, where it may stain the transfer surface or sheet
edge.
If you notice such staining, clean the rollers and guide boards in the finisher.
Use the following procedures to clean the rollers and guide boards in the finisher:
Roller
Wipe the roller with a well-wrung-out damp cloth, and then wipe with a dry, unused, lint-free cloth until
no moisture remains.
Guide Board
Wipe the guide board with a well-wrung-out damp cloth. To clean the innermost recesses, use a cloth
that is as large as your palm.
Perform the following cleaning steps from Steps 1 to 7 in this order:
4.Troubleshooting: Post-Processing Option
503