Job Control Tasks Through Windows Of Pc Ui; Job Control Tasks Through Command Line; Job Control Tasks - Xerox 4635 Operator's Manual

JOB CONTROL TASKS

Job control tasks through windows of PC UI

Job control tasks through command line

5-2
To select job control tasks using the windows of the PC UI:
Open the Job Control menu icon.
The Job Control menu window appears, listing the available
options.
Figure 5-1. Job Control menu window
2. Turn to the section of this chapter which explains the task in
which you are interested.
You can activate job control tasks by entering commands either:
• Through the Messages window of the PC UI
• Through the system controller terminal (non-U.S. markets
only).
To enter commands through the Messages window of the PC UI:
1. Place the cursor in the window.
2. Click once with the left mouse button.
3. Enter the command.
If you are using the system controller terminal, just use the
keyboard to enter the command.
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE