Xerox 4635 Operator's Manual page 271

Adjusting the decurler lever
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
1. Open the right door of the printer and locate the decurler
lever.
Figure 12-6. Locating the decurler lever
2. If the print curl is +2 or more, move the green decurler lever
to the right.
3. If the print is -3 or more, move the green decurler lever to
the left.
4. If the decurler adjustment does not eliminate the paper curl
problem, turn the paper stack over in the feeder tray.
5. If there is still a paper curl problem, perform steps 1 to 4
again.
6. If all else fails, insert paper from a new ream.
PROBLEM SOLVING TASKS
12-7