Xerox 4635 Operator's Manual page 111

Remote Terminal
Remote Terminal task through windows
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
The remote terminal function is only available in conjunction with
Xerox Print Services Manager software. Please refer to the 4635
Installation Planning Guide for hardware requirements for use of
the remote terminal option.
Use this task to transfer control of the 4635 from the PCUI to a
remote device.
Note: This selection will only appear if the required software
options have been loaded.
Select "Remote Terminal" from the System Control menu. A
window appears asking you for confirmation.
Figure 4-15. Remote terminal confirmation window
After remote terminal has been entered, the System Controller
will no longer recognize input from the PCUI and the message
shown in figure 4-16 will be displayed. To return control of the
4635 to the PCUI, the command @UI$ must be entered at the
remote terminal.
Figure 4-16. Remote terminal display window
SYSTEM CONTROL TASKS
4-27