Continue Input/Output - Xerox 4635 Operator's Manual

Continue input/output

Continue Input/Output task through
Continue Input/Output task through
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
• To stop printing, enter the following command:
STOP O
Use this task to resume interrupted input processing, printing, or
both.
Continue is also used:
• To confirm that you have completed activities such as loading
paper
• To resume operation of the LPS after a system report of a
fault, such as a paper jam.
Input and/or printing resume at the point where stopped.
• To resume both input and output processing, you may also
press the <CONTINUE> key on the keyboard
• To resume printing, you may also press the Continue button
on the printer control console.
Note: You can also open the I/O window by chording the
mouse—that is, pressing both the left and right buttons of
the mouse at the same time.
windows • To continue both input processing and printing, select
"Continue Input/Output" from the Job Control menu.
• To continue input processing, select "Continue Input" from
the Job Control menu.
• To continue printing, select "Continue Output" from the Job
Control menu.
command line • To resume both input processing and printing, enter the
following command:
CONTINUE
• To resume input processing, enter the following command:
CONTINUE I
• To resume printing, enter the following command:
CONTINUE O
JOB CONTROL TASKS
5-17