Xerox 4635 Operator's Manual page 278

PROBLEM SOLVING TASKS
12-14
Figure 12-16. Area 9
Notes:
•
• Lower tray 1 and pull out tray to allow better access, when
clearing area 9.
• Pull the area 9 green lever toward you to unlatch it. Ensure
that you relatch the lever once you have cleared any paper in
this area. You may also want to pull out tray 1 and hold the
green lever down in order to remove paper wedged in this
area more easily.
• Area 9 also has a green knob (located to the right of the
lever), which can be turned to help you clear paper.
• If paper rips as you are removing it from area 9, or if you
have difficulty removing paper from this area, you may have
to use the pinch lever located further inside area 9. Paper
may be caught in this area when doing duplex printing.
Follow this procedure:
1. Locate the green pinch lever directly behind area 9
(above the green knob and further inside area 9).
2. Carefully reaching your hand into the area, squeeze the
edges of the pinch lever and lift it up.
CAUTION: This area of the printer may be hot. Be
careful when inserting your hand.
3. Remove any paper caught in this area.
4. Replace the green pinch lever to its original position.
Make sure that you relatch the lever once you have
cleared any paper in this area.
5. Discard any paper you removed.
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE