Xerox 4635 Operator's Manual page 205

XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
Note: You can also display the cluster information by
entering the cluster name in the Cluster Name field
and selecting the Show header button.
b. Select the box(es) above the tray number(s) you want
to assign to the cluster or deselect the boxes above
the tray numbers you want to remove from the
cluster.
c. Select either header button:
— Set Preferred. Assign the new preferred trays to
the cluster.
— Set Current. Assign the new current trays to the
cluster.
The tray information displayed for the cluster is updated with the
new tray assignments.
Note: You can automatically assign the preferred trays to
the current trays, for a cluster by entering the cluster
name in the Cluster Name field and selecting the Set
button.
• To delete an existing cluster:
a. Highlight the cluster name in the display field.
b. Select the Delete header button.
• To create a new cluster:
a. Enter the new cluster name in the Cluster Name field.
b. Select the box(es) above the tray number(s) you want
to assign to the cluster.
Note: You assign only preferred trays to a new
cluster.
c. Select the Autosize box if you want to apply the
autosize option to the new cluster. ( Autosize allows
you to load different size paper in different trays.)
d. Deselect the NR check box if you do not want to
apply the No Replace option to the new cluster. (No
Replace keeps all cluster definitions for trays, so that
a tray can belong to more than one cluster. The
default value of the No Replace check box is
"selected.")
Note: Depending on how your system was set up,
you may not have the NR option.
e. Select the Edit Preferred header button to assign
preferred trays to the new cluster.
STATUS AND PRINT TASKS
9-15