Cleaning Precautions-Read Before Cleaning; Cleaning Procedures; Access To The Tape Path - Xerox 4635 Operator's Manual

Cleaning precautions—READ BEFORE CLEANING

Cleaning procedures

XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
• The edges of the tape cleaner are extremely sharp. Observe
great care when cleaning them.
• Avoid inhaling fumes from the cleaning fluids.
• Keep the cleaning solution containers tightly closed when
not in use.
• Use the cleaning solutions only in well-ventilated areas.
• If you have sensitive skin, you may want to wear gloves when
using the cleaning solutions.
• Avoid prolonged contact with the skin.

Access to the tape path

1. Open the cover of the peripheral cabinet.
2. Release the three turnbuckles on the tape path cover by
turning them counter clockwise.
Figure 11-22. Releasing the turnbuckles
3. Raise the cover as far as it will go.
4. Press the Reset button to open the tape loading door.
5. Turn off the tape drive by pressing the Power switch off.
MAINTENANCE TASKS
11-17