Xerox 4635 Operator's Manual page 237

Copy Floppy Disks task through
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
3. Select the appropriate header button:
•
•
•
command line • To format and initialize a floppy disk, enter the following
command:
FLOPPY FORMAT
• To copy files from the system disk to a floppy disk, enter the
following command:
FLOPPY SAVE [REVIEW] [disk-id] {input-file-id|output-file-
id|file-id|file-type|ALL}
REVIEW
disk-id
input-file-id|output-file-id|file-id|file-type
ALL
• To copy files from a floppy disk to the system disk, enter the
following command:
FLOPPY RESTORE [REVIEW] [disk-id] {input-file-id|
output-file-id|file-id|file-type|ALL}
REVIEW
disk-id
input-file-id|output-file-id|file-id|file-type
ALL
Apply/Close. Apply your selection and close the window.
Apply. Apply your selection.
Close. Close the window.
Prompts you to confirm or stop overwriting a
floppy file by a system file. If you enter N, the
file is not copied to floppy disk, and the save
process skips to the next file on the system
disk.
The system disk unit containing the files to be
saved. If you do not specify a disk id, all disks
are searched.
The identity of the input and output files.
Saves all user files on the floppy disk.
Prompts you to confirm or stop overwriting a
system file by a floppy file. If you enter N, the
file is not copied to system disk, and the
restore process skips to the next file on the
floppy disk.
The system disk unit to which the file is copied.
The identity of the input and output files.
Copies all user files to the system disk.
FILE CONTROL TASKS
10-13