Xerox 4635 Operator's Manual page 70

PAPER FACTS
Stock type
16 pound/60 gsm paper
20 pound/75 gsm paper
65 pound card stock
110 pound/200 gsm
paper (index)
20 pound or 80 gsm
dual-purpose
3-hole drilled
4-hole drilled
7-hole drilled
Non-tearing 3-hole
Non-tearing
Xerox carbonless paper
3-6
Instructions for use
• Load paper with ream wrapper seam side down. If there is no arrow on the
ream wrapper, load paper in trays 3, 4, 5 and 6 only, with curl up.
• Duplexing 16 lb. paper is not recommended.
• Best performance can be expected from trays 3, 4, 5 and 6.
• Load paper with ream wrapper seam down. If there is no arrow on the ream
wrapper, load paper in trays 3 and 4 only, with curl up.
• Run from any tray.
• Load with holes to the RIGHT.
• Use the Align task to avoid printing near the holes.
• Fan paper thoroughly and check for loose paper plugs prior to loading.
• Load in trays 1 and 2 only.
• Load with holes to the RIGHT.
• DO NOT run two-sided (duplex) prints.
• Load in trays 1 and 2 only.
• DO NOT run two-sided (duplex) prints.
• Load paper in trays 3, 4, 5 and 6 only.
• Only Xerox carbonless paper is recommended for High speed Xerographic
equipment.
Table 3-5. Paper stocks guide
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE