Unloading A Stacker Bin - Xerox 4635 Operator's Manual

Unloading a stacker bin

XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
1. Select a bin for unloading by pressing the Bin Unload button
on the bin control panel. (You can also select the bin for
unloading through the PC UI or the printer mimic of the
printer control console. Refer to the "Lower trays and bins"
section of chapter 9, for instructions.)
Figure 3-12. Bin Unload button
2. Once a bin is selected, the bin elevator lowers.
Note: Once the bin elevator lowers, the bin cannot be used
until it is emptied completely.
3. When the bin elevator stops in the down position, the Ready
to Unload indicator lights.
Figure 3-13. Ready to Unload indicator
PAPER FACTS
3-17