Endjob; Drain - Xerox 4635 Operator's Manual

ONLINE PRINTING TASKS

Endjob

Endjob task through windows
Endjob task through command line

Drain

Drain task through windows
Drain task through command line
6-6
The Endjob task signals the LPS that the current print job is the
last job coming from the host. All formatted pages in the output
queue are printed. You may want to use the Endjob task under
the following circumstances:
• When switching from printing online to printing offline
• When an online print job doesn't contain a trailer page to
indicate the end of the report
• If the trailer page has not been sent completely
• As an option to deal with multi-copy disk saturation
• When a "MOUNT FORM" message appears on an IBM host
terminal.
1. Select the "Endjob" option from the Start window's header
auxiliary menu. (Refer to figure 6-2.)
A message appears when the job has printed.
2. You can now enter another start request.
Enter the following command:
ENDJOB
Use the Drain task to print all formatted pages in the print file or
in memory without ending the print job in progress. You do not
need to enter another start request for printing to continue.
Note: Sheets are printed if complete data pages are in the print
file or in memory. Partially completed pages are not printed.
Before draining the print queue, check the status of the job using
the jobs status task. Refer to chapter 9, "Status and print tasks,"
for instructions.
Select the "Drain" option from the Start window's header
auxiliary menu. (Refer to figure 6-2.) A message appears when
the drain is complete.
Enter the following command:
DRAIN
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE