Xerox 4635 Operator's Manual page 31

XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
SYSTEM OVERVIEW OF THE 4635 LASER PRINTING SYSTEM
example, continuing an interrupted job) without returning to the
PC UI. The printer control console has the following features:
• Local controls and displays for jam clearance, paper
loading/unloading, and diagnostics/service (used by the
service representative). Two types of messages are displayed
on the printer control console: fault messages, which relate
to printer malfunctions, and information messages, which
relate to printer conditions such as low dry ink.
• Touch-sensitive areas that allow you to select options by
touching the printer control console screen. A tone sounds
when you touch one of these areas.
• Printer alarm consisting of sets of three beeps, for a duration
of ten seconds. This tone is generated by any event that
stops printer operation (for example, a paper jam).
You can deactivate the alarm through the PC UI (refer to
chapter 4, "System control tasks," for instructions). The tone
stops after three cycles, or when the fault condition is
cleared or clearing has started (for example, doors or covers
specified in the clearance instructions are opened). You can
also stop the tone by pressing one of the printer control
console buttons or by selecting a function through the touch
screen.
• To prevent monitor burnout on the PC UI, a screen saver
feature automatically blanks the screen and flashes a "Xerox
4635" logo when the PC UI desktop is inactive for five
minutes. The five minute time limit is a default which can be
changed by your service representative.
To return to the normal desktop once the PC UI is in screen
saver mode, simply move the mouse, click a mouse button,
or press any key.
1-9