Xerox 4635 Operator's Manual page 219

Jobs Status task through windows
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
• Input Status. The processing stage of the job (for example,
"Idle").
• Input source. The origin of the print job (for example,
"Tape").
• Output Status. The printing stage of the job (for example,
"Printing").
• Remote Status. The status of the remote communication (for
example, "Suspended").
• Remote Source. The remote source of a job, if applicable
(for example, "Site PC").
Note: When the system is idle, only the status information is
displayed: Input Status, Output Status, and Remote Status.
You may also use this task to display the status of less than 100
print jobs or up to 100 jobs with any of the following statuses:
• Done. The job was completely printed.
• Aborted. The job was aborted during processing or printing.
• Reset. The job was aborted by the Reset task.
• RCVY/NS. The job was aborted due to a system rollover, and
you did not ask to recover and print the job.
Note: You can also access the Jobs Status window (PC UI) or
display (system controller terminal) by pressing the <JOBS
STATUS> key.
1. Select "Jobs Status" from the Print Tasks menu to open the
Jobs Status window.
Figure 9-17. Jobs Status window
2. To display the status of current jobs, select the Current
header button. (This is the default display.)
3. To display completed jobs, select either:
• The All header button to display all jobs awaiting
processing and the status of up to 100 completed jobs.
The Jobs All window opens, allowing you to select the
number of completed jobs you want to display.
• One of the other buttons to display only completed jobs
with the selection status. For example, to display up to
100 completed jobs with the status Done, select the
Done button.
STATUS AND PRINT TASKS
9-29