Set Container Size - Xerox 4635 Operator's Manual

STATUS AND PRINT TASKS
Set Tray Size task through windows
Set Tray Size task through

Set container size

9-22
1. Select the "Tray Size" option from the Printer Status
window's header auxiliary menu to open the window.
Figure 9-12.
2. Select the tray containing custom size paper.
3. Enter the paper dimensions in the Add/Replace input fields.
Note: If the selection of the Units window is inches, enter
the dimensions in inches; if it is millimeters, enter the
dimensions in millimeters. (Refer to the "Select units"
section of this chapter for additional information.)
4. Select the appropriate header button:
•
•
•
command line Enter the following command:
SET TRAY n,w,l
n
w
l
Note: You cannot enter inches in command line mode.
Use this task to change the maximum paper size allowed in a
container for custom print jobs.
• The allowable paper size range is 7 by 10 inches/178 by 254
mm to 11.69 by 17 inches/297 by 432 mm.
• Any subsequent pages after the first sheet must be within 25
mm on each dimension of the first sheet.
• You must not set the container size larger than the actual
size of the container.
Tray Size window
Apply/Close. Apply your selection and close the window.
Apply. Apply your selection.
Close. Close the window.
The tray you want to modify.
The new width in millimeters.
The new length in millimeters.
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE