Stacker Bins - Xerox 4635 Operator's Manual

Stacker bins

XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
6. Push the tray in, slowly but firmly, until it latches. Do not
slam the tray closed, as this can cause improper latching or
machine damage.
7. If the printer stopped due to a low paper condition, press
the Continue button on the printer control console to
resume the print job.
The 4635 LPS can have up to four high-capacity stacker (HCS)
bins. (Refer to chapter 1, "System overview of the 4635 LPS," for
additional information on the high-capacity stacker bins.)
• You can lower, pull out, and unload any bin not currently in
use, without interrupting printing, as long as another HCS is
ready to receive paper.
• If you select a bin that is in use, the printer begins stacking in
the next defined high-capacity stacker bin if it is available. If
no stacker bin is available, printing stops.
• Once a sheet is delivered to a stacker bin, each subsequent
sheet must be within 25 mm of each dimension of the first
sheet.
Refer to table 3-6 for additional information on performance of
the high-capacity stacker bins.
PAPER FACTS
3-15