Xerox 4635 Operator's Manual page 266

PROBLEM SOLVING TASKS
12-2
Figure 12-1. Fault List screen
The Fault List screen displays any outstanding fault codes and
shows a mimic of the printer, with the area containing the
masked fault highlighted in light yellow.
Notes:
• For greatest printer productivity, clear any masked faults at
your earliest opportunity.
• When the printer stops because of a fault, it is a good idea
to display the Fault List screen after clearing the fault to see if
there are any outstanding masked faults. Clear these masked
faults before continuing with the print job. Doing so will
enhance printer productivity.
• When there is a fault that cannot be masked, that is, that
causes the printer to stop, the Fault icon (a dark yellow
triangle with an exclamation point inside) appears on the
printer control console and the Attention light flashes. The
Fault screen appears on the printer control console,
highlighting (in dark yellow) the area(s) of the printer
containing the fault, and instructions are given for clearing
the fault.
• If a fault exists in the system at the time that a masked fault
occurs, only the Fault icon appears on the printer control
console. Any masked fault condition messages still appear in
the message area of the printer control console.
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE