Xerox 4635 Operator's Manual page 145

XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
7. Wind the tape clockwise for approximately two turns. Wind
the take-up reel counterclockwise until the tape tightens.
Figure 7-10. Winding the tape
8. Close the tape path cover and secure the turnbuckles by
turning them clockwise.
9. Close the cover of the peripheral cabinet and press the
Power switch to the ON position by pressing down on the
side marked 1.
Figure 7-11. Power switch
10. When the tape drive finds the BOT indicator, "Ld Point"
appears on the tape drive message display and the tape drive
is placed online.
OFFLINE PRINTING TASKS
7-7