Clusters - Xerox 4635 Operator's Manual

Tray Loading task through
system controller
(non-U.S. markets only)

Clusters

XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
terminal
1. When a print job calls for a stock change, the existing
clusters appear on the system controller display. The current
trays field is blank for undefined clusters.
Refer to the following example.
BLUE ASIZ ----PREFER---
GREEN ASIZ ---PREFER---
2. Load the correct stock in the correct trays.
3. To define the current trays for the undefined cluster, enter
the following command:
CLUSTER cl-name tray number
cl-name
tray number
Use the Clusters task to:
• Display all the clusters in the system with their preferred and
current trays
• Define new clusters
• Edit preferred or current trays for existing clusters.
Note: You must define tray contents to the LPS when you
change the stock in a tray being used by the current stockset
without being prompted by the system to change the stock
in that tray.
----CURRENT---
1 3 1 3
---CURRENT---
2
The name of the cluster you are defining.
The tray(s) in which stock for the cluster is
currently loaded.
STATUS AND PRINT TASKS
---STATUS---
HAS TRAYS
---STATUS---
IS DEFINED
9-13