Configure Feeding Or Finishing Device - Xerox 4635 Operator's Manual

STATUS AND PRINT TASKS
Jobs Status task through

Configure feeding or finishing device

Configure task through windows
9-30
4. The Jobs Status window now displays completed jobs that fit
your selection.
Note: To update the jobs status display for your selection, click
on the appropriate header button. The current display is
designated by a check mark.
command line • To display jobs status, enter the following command:
JOBS
• To display only reports in the print queue (that is, waiting to
be printed), enter the following command:
JOBS Q
• To display up to 100 jobs with specific statuses, enter the
following command:
JOBS ALL {DONE|RESET|ABORT|RCVY|n}
DONE
RESET
ABORT
RCVY
n
Use this task to:
• Send the configuration values for a feeding or finishing
device to the printer
• Display the current device configuration values.
1. Select one of the following options from the Printer Status
window's header auxiliary menu:
•
•
•
Note: The option you see depends on the devices set up for
your LPS.
Depending on the option selected, one of the following
windows appears on the PC UI desktop.
Display jobs with the status "Done."
Display jobs with the status "Reset."
Display jobs with the status "Aborted."
Display jobs with the status "RCVY|NS."
The number of jobs for which you want status
information displayed.
"Feeding Configuration "
"Finishing Configuration"
"Feed/Finish Configuration"
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE