Xerox 4635 Operator's Manual page 108

SYSTEM CONTROL TASKS
4-24
• If you select option 2, the following messages appear:
CALL THE FIELD SERVICE DISPATCHER AND REPORT THESE NUMBERS
(DISPATCH CODES)
OPERATOR --- INDICATE THE ACTION YOU HAVE TAKEN.
1. SERVICE CALL HAS BEEN PLACED.
2. SERVICE CALL HAS BEEN PLACED.
OPERATING SYSTEM.
3. SERVICE NUMBERS COPIED FOR LATER CALL.
OPERATING SYSTEM.
4. NONE OF THE ABOVE.
INDICATE SELECTION BY ENTERING NUMBER.
• If you select any option other than 1, you can continue
using the LPS.
• If you select option 1, the following messages appear:
SERVICE CALL PLACED.
WAITING FOR CE
1. REDISPLAY DISPATCH CODES
2. RETURN TO OPERATING SYSTEM
INDICATE SELECTION BY ENTERING NUMBER.
• Select option 1 to see the dispatch codes.
• Select option 2 to continue using the LPS.
3. Ensure that you record the 6-digit dispatch code to report to
the service representative.
Note: In the U.S., the message CALL THE FIELD SERVICE
DISPATCHER AND REPORT THESE NUMBERS refers to the
National Customer Service Support Center. For non-U.S.
areas, contact your local service representative.
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
WAITING FOR SERVICE.
RETURN TO THE
RETURN TO THE
RETURN TO THE OPERATING SYSTEM.